欧美一级A一级a爱片久久,伊人久久大线蕉色首页

Home --> Seamless steeI tubes for structures

Standards：
GB,_r81 62 Chinese national standard
ASTM A53 Standard of American Society of Testing Materials
ASME SA53 Boiler and pressure vessel--c-Ojrde of ASME
Application：
Seamless steel tubes for manufacturing pipelines。vessels，equipment and mechanical structures
Model No.of major steel tubes：
1O,20,35,45,Q345,15CrMo,12Crl MoV,A53A,A53B,SA53A,SA53B, etc．
Diamensional tolerances:

Types of steel tubes	Outer diameter		Wall thickness
Cold-rolled tubes	Tube sizes(mm)	Tolerances(mm)	Tube sizes (mm)	Tolerances(mm)
	＞30～50	±0.3	≤30	±10％
	＞50～219	±0.8％	≤30	±10％
Hot-rolled tubes	＞219	±1.0％	＞20	±10％

Mechanical properties：

Standard codes	Models of steel tubes	Tensite strength（MPa）	Yield strength（MPa）	Elongation（％）
GB/T8162	10	≥335	≥205	≥24
	20	≥390	≥245	≥20
	35	≥510	≥305	≥17
	45	≥590	≥335	≥14
	Q345	≥490	≥325	≥21
	15CrMo	≥440	≥295	≥22
	12Cr1MoV	≥490	≥245	≥22
ASTM A53 ASME SA53	A	≥330	≥205	Check the table in ASTM A 53 Check the table in ASME SA53
ASTM A53 ASME SA53	B	≥415	≥240	Check the table in ASTM A 53 Check the table in ASME SA53

Chemical composition:

Standard codes	Models of steel tubes	Chemical compositions（％）
Standard codes	Models of steel tubes	C	Si	Mn	P	S	Cu	Ni	Mo	Cr	V
GB/T8162	10	0.07～0.14	0.17～0.37	0.35～0.65	≤0.035	≤0.035	≤0.25	≤0.25	/	≤0.15	/
	20	0.17～0.24	0.17～0.37	0.35～0.65	≤0.035	≤0.035	≤0.25	≤0.25	/	≤0.25	/
	35	0.32～0.40	0.17～0.37	0.50～0.80	≤0.035	≤0.035	≤0.25	≤0.25	/	≤0.25	/
	45	0.42～0.50	0.17～0.37	0.50～0.80	≤0.035	≤0.035	≤0.25	≤0.25	/	≤0.25	/
	Q345	0.12～0.20	0.20～0.55	1.20～1.60	≤0.035	≤0.035	≤0.25	≤0.25	/	≤0.25	/
	15CrMo	0.12～0.18	0.17～0.37	0.40～0.70	≤0.035	≤0.035	≤0.25	≤0.30	0.40～0.55	0.80～1.10	/
	12Cr1MoV	0.08～0.15	0.17～0.37	0.40～0.70	≤0.035	≤0.035	≤0.25	≤0.30	0.25～0.35	0.90～1.20	0.15～0.30
ASTMA53 ASMESA53	A	≤0.25	/	≤0.95	≤0.05	≤0.06	≤0.40	≤0.40	≤0.15	≤0.40	≤0.08
ASTMA53 ASMESA53	B	≤0.30	/	≤1.20	≤0.05	≤0.06	≤0.40	≤0.40	≤0.15	≤0.40	≤0.08